LiquiVac Oil Change Pump Kit

Order Line
978-562-5575
Mon-Fri 9:00-5:30
eastern time zone

How to change oil without getting messy

Stop changing your engine oil the old-fashioned way.Do it the easy and clean way with the patent pending LiquiVac Oil Changing System. It's a self-contained system that suctions oil directly from the dipstick into the holding tank. No drain plugs. No stripped threads. No leaky bolts or seals. No crawling under vechicles. No spills or mess. Never heard of this method? Well, believe it or not, the suction method is recommended in current Mercedes-Benz maintenance literature, and many well-equipped service shops are now using this method.

Just Three Easy Steps:

Depressurize (pump) the holding tank
Insert the suction hose down the engine's dipstick tube
Release the suction hose clamp

It works fast, drawing used oil into the large 8-quart capacity tank and ready for proper environment disposal. No electricity is needed!

Makes even difficult oil changes easy!

The LiquiVac is especially suited for engines that are hard to service. You know them... Lawnmowers, ATVs, motorcycles, generators, boats, cars, go-carts, tractors, etc. Often drain plugs on these engines are near impossible to reach. Now you can easily extract the oil directly through the dipstick tube. Plus, the LiquiVac works fast, a typical 1-quart capacity lawnmower takes less than 30 seconds to change! The LiquiVac also can be used to extract transmission fluid, differential grease, radiator coolant, hydraulic fluid and even winterize water lines.